Mishimoto Öl-Auffangbehälter "Baffled", PCV Seite - '14+ Ford Fiesta ST

Artikelnummer: MMBCC-FIST-14P

Kategorie: Catch Cans


209,00 €

inkl. 19% USt., zzgl. Versand

Dieses Produkt hat Variationen. Wählen Sie bitte die gewünschte Variation aus.


The Mishimoto Ford Fiesta ST Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with direct fuel injection engines. Thousands of test miles were logged on our Fiesta ST to determine what can setup would work the best. Mishimoto engineers found that most vehicles, placing the catch can in the vacuum assisted PCV system of the vehicle will yield the most amount of oil accumulation during normal and aggressive driving. Where a catch can placed on the crankcase vent system on the left side of the engine will yield nearly no accumulation on stock or lightly modified vehicles. Having only one catch can, tied into the PCV system will, by far, work the best for the vast majority of Fiesta ST?s on the road.

The Mishimoto Ford Fiesta ST catch can kit uses the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The kit comes with two direct-fit silicone hoses with pre-assembled quick-disconnect fittings available in either black, blue, or red to suit your taste. It also includes one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location! Two plastic, ½? barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty!

- Single can mounts in-line with the PCV system to separate oil particles using 50 micron bronze filter
Silicone hoses include pre-attached stock-style quick-disconnect fittings for plug & play install
Offered with black, blue, or red silicone hoses that come pre-molded for a reliable install
Application-specific bracket mounts the can in a serviceable location in the front of the engine bay
Billet 6061 aluminum sealed can
Defends intercooler, intake system, and essential components from oil blow-by
Reduces carbon build-up on the intake valves
Helps maintain proper octane levels to reduce potential detonation
Filter and can are fully serviceable
Internal air diverter turbulates air longer to improve oil separation
Mishimoto Lifetime Warranty


Purchase Includes
(1) Application-Specific Mounting Bracket
(1) Black, Anodized 6061 Aluminum Catch Can
(2) Direct-Fit Silicone Hoses with Quick-Disconnect Fittings
(2) Plastic Barbed Fittings
(3) Worm-Gear Clamps
(1) Air Diverter
(1) Internal Baffle & Rod
(1) 3/8" NPT Plug
(1) Large O-Ring
Mounting Hardware
Mishimoto Lifetime Warranty

2014+ Ford Fiesta ST

Engine Codes
1.6L EcoBoost

Chassis Codes
After installation, Mishimoto recommends checking the contents of the baffled catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.

Installation Torque Specs
22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).

Bewertungen (3)

Durchschnittliche Artikelbewertung

4 Sterne
3 Sterne
2 Sterne
1 Stern

Teilen Sie anderen Kunden Ihre Erfahrungen mit:

Einträge gesamt: 3
5 von 5 Sehr Gut

Das OCC von Mishimoto ist sehr gut verarbeitet. Die Silikonschläuche sind passgenau und sehr gut verarbeitet.

., 02.02.2016
5 von 5 Tolle Lösung

Sehr gute Passform, mit dem neuen Halter auch gut zu verbauen

., 16.04.2016
5 von 5 Leider nicht ganz Plug & Play

Die Halterung wird auf bestehende Schrauben befestigt, diese sind bei den Euro-Spec Fiestas leider etwas kürzer. D.h. dort müssen längere verbaut werden. Der Austausch dieser Schrauben ist jedoch kein Problem.
Der restliche Teil des einbaus lief problemlos.

., 08.05.2016
Einträge gesamt: 3