Shopauskunft
4.85 / 5,00 (36 Bewertungen)
Shopauskunft_logo

Shopauskunft

4.85 / 5,00
36 Bewertungen
Shopauskunft 4.85 / 5,00 (36 Bewertungen)

Bedienerfreundlichkeit
Produktsortiment

Preisgestaltung
Bestellabwicklung

Lieferung
Service und Support

Mirco
02.06.2021
VTI-Turbo
18.05.2021
T. Prinz
29.03.2021
Stabi
23.03.2021
iceman
27.01.2021
Andras
14.12.2020
Niko
30.11.2020
Tomeck
17.11.2020
DeadVikingg
05.11.2020
T
18.10.2020
Ultra Racing Rear Sway Bar 25 mm - 01-05 Honda Civic (EP3) 2.0 / 02-06 Acura RSX / Honda DC5 2.0/2.4 (2WD)

SKU: UR-AR25-211

Category: Sway Bars


248,00 €

incl. VAT* , plus shipping costs

Order item

Delivery time: 61 - 62 Workdays



Anti roll bar


BEFORE:
When turning in corner, the weight transfer will make the car sway a side, causing body roll and more difficult to turn in to a corner, weaken the steering respond.


AFTER:
The upgrade version of Ultra Racing’s anti roll bar will be more effectively preventing the car sway a side at cornering, greatly reduce body roll and high stability in cornering.


MATERIAL SPECIFICATION & DESIGN

Every materials used are carefully selected to ensure the best performance and safety. The brackets are made of 4mm to 5mm steel plates, while the hollow steel tubes and oval tubes are of 1.2mm to 1.6mm thickness. These materials are selected to ensure the bars are rigid and strong to maintain constant geometry at all times, yet safe enough to crumble during an impact for safety reason.

All our raw materials has been made and tested with satisfactory result.


MILL / TEST CERTIFICATE (Chemical Composition)

Specification
- JIS 3101 SS 400 (Japan International Standard)
- JIS G 3141 SPCC SD (Japan International Standard)
- ASTM A 500 Grade A (American Standard)
- BS 1387 ( British Standard)

Steel vs. Aluminum

Why Ultra Racing use Steel instead of Aluminum?

First, steel is stronger than aluminum for the same size and thickness. In order for aluminum alloys to be at least the same strength as steel, it has to be at least double the thickness (steel 4mm = aluminum 8mm). When that happens, weight saving is not so apparent anymore. Of course there are also exotic materials and alloys that can match the strengths of steel, but the cost are astronomically high and therefore not very cost effective to bring into mass production.

Average item rating

Write the first review for this item and help others make a purchase decision!:

There are no reviews in the current language.